Dehumidified Drying Loader

Dehumidified Drying Loader

Dehumidified Drying Loader (RDC series) combine the function of dehumidifying, drying and two-stage conveying into one single
unit (it is optional purchase for three-stage conveying),specified for the production of "hygroscopic engineer plastics" products, such as PA,PC,PBT,PET,ABS,PMMA etc. Under ideal conditions, a better honeycomb is optional to use so as to make dew point reach -50℃. The machine is characterized with nice appearance the patent for chain-wheel transmission design, advanced technology, reliable performance. It is an indispensable machine in the modern industry.

The characters of the machine:
1) European-design style, attractive appearance.
2) Up-to-date chain-wheel transmission design with more stable performance, long time using life.
3) Equipped with honeycomb rotor for getting more stable air drying.
4) Stainless and insulated drying hopper features air pipe down-blowing design. This improves drying efficiency, and reduces
energy consumption while maintain a steady drying effect.
5) Adopted two condensers to ensure a low return air temperature and low dew point.
6) Equipped with material cut valve for conveying system to ensure no material remains in the material pipe.
7) Adopted P.I.D temperature controller, with over temperature protector, overload protection on motor, reverse phase protection on electric machine etc.
8) Closed-loop conveying system eliminates the possibility of moisture re-absorption during material conveying.
9) It is optional purchase for a dew point gauge, in order to monitor dehumidifying effect anytime.

Introduction:
The compact designed RDC series 3 in 1 dehumidifying dryer loader ensures the material are dried in the closed loop system, prevent external air contact and preform well drying effect. Dehumidified Drying loader (RDC series) combine the function of dehumidifying, drying and two-stage conveying into one single unit (it is optional purchase for three-stage conveying),specified for
the production of "hygroscopic engineer plastics" products, such as PA,PC,PBT,PET,ABS,PMMA etc.
　They feature honeycomb rotor for dehumidifying, ensuring continuous and constant low dew-point. Under ideal conditions, it can provide lower than -40℃ dew-point dehumidified air.
The machine is characterized with nice appearance the patent for chain-wheel transmission design, advanced technology, reliable performance. It is an indispensable machine in the modern plastic industry.

Features:
Combine the function of dehumidifying, drying and two-stage conveying into single unit.

RDC Drying Loaders are equipped with honeycomb rotor to obtain stable low dew-point drying air.

Feeding system is equipped with shut-off valve to ensure no surplus raw material in hopper tubes.

Microprocessor is standard equipment.

Heat preserved drying hopper barrel adopts down blowpipe design and collocates with cyclone air exhaust to avoid heat lost and improve drying efficiency.

This dehumidifying series adopt double cooler structure to ensure lower return air temperature and dew-point value.

Dew-point monitor is optional to monitor dew-point value at all times.

Dew-point value is settable, dew-point value is set between -40 to +10℃ according to actual need of plastics material. 0~10% of
total power consumption could be saved.